Payment & Shipping Terms:
1P - 16P Single Phase / Three Phase Power Distribution Blocks Connector
FJ6D series guide-rail connection terminal has the features of both fence-type series and guide-rail type series. With random combination of pole numbers, it is connected with the bolts and fixed with the locater, and then assembled at guide rail. This series of terminals is widely used in the industries such as power supply, industrial control, and frequency conversion, etc.using flame retardant polycarbonate plastic, conductive plate with a piece of copper line double screw compression joint technology, rated insulation voltage 800V, connecting section is 20-60mm into two bus lines,section 35-70mm, suitable for small switch box meter box and line connection,TH35mm rail installation.
Install it on TH - 35 rail (top-hat rail) .It is suggested that multi-core wire should be used for connecting conductors. And only the conductor is inserted into the bottom of blind hole thoroughly,could the screw be tightened down to prevent wrong connection.
|Gap||45.00||Insulation body||PC, UL94, V-0|
|Crimping Range||150mm2(MAS)||Crimping screw||M8, steel and nickel plating|
|Screw Torque||40 lbf.in||Conductive plate||Brass, nickel plating|
|Rated Parameters||600V, 300A||Applicable temp.||-40℃~+120℃|
|Impulse Voltage||6000V||Effective pole no.||1-16|
Contact Person: Jason