|
Product Details:
Payment & Shipping Terms:
|
Phase: | 3 Phase 4 Wire | Display Type: | Digital Or Analogue |
---|---|---|---|
Basic Current: | 5A 10A 50A | Voltage: | 3X220V Or 3X380V |
Application: | Industrial Or Home Use | Communication: | Pulse Output |
Installation: | Din Rail Energy Meter | OEM/ODM: | Welcome |
High Light: | din rail watt hour meter,three phase watt hour meter |
50/60Hz 7 modular Three phase energy meter, din rail mounted digital kWh meter
Product Description
Model YEM021EI type meter completely accord with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net
Specification
Model |
Accuracy |
Reference Voltage |
Current Specification |
Starting Current |
Insulation Performance |
YEM021EI |
Class 1 |
3x127/220V 3x230/400V |
5(30)A 10(60)A 20(100)A |
0.02A 0.04A 0.08A |
AC voltage 4kv for 1 min, 1.2/50us waveform impulse voltage 6kv |
* If you need different reference voltage or current specification, please advisory our sales personnel.
Competitive Advantage
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.
2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3. Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May select 6+1 digits display (Product Configuration code is AK).
4. Standard configuration one port of pulse output passive (polarity),May select increase a distant port of pulse output passive (nonpolarity), (Product Configuration code is AI).
5. And contact with all kind of AMR system conveniently,complying with standard IEC 62053- 31 and DIN 43864.
6. Two LED instructions power supply state (green) and signal of energy impulse (red).
7. Standard configuration dont detection direction of the flow of load current. May select automatic detection the direction of the flow of load current. And instructions (Only red energy impulse signal when working, that is meaning the direction of the flow of load current reverse).
8. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
Dimension
Wiring Diagram
Working condition
1. The installation altitude less than 2000m
2. The surrounding temperature range: from -5~40 degree
3. In the non-explosive condition. or without adequate erosion and destruction of gas and dust conductive area
4. Without rain and snow invade
5. Pollution level 2.
Contact Person: Ms. Linda
Tel: 86-577-61616258
Fax: 86-577-61616258