YEM021GC Accuracy Class 1 Three Phase Energy Meter Direct Mode For Shopping Malls

YEM021GC Accuracy Class 1 Three Phase Energy Meter Direct Mode

Features:

•  Active three-phase electric power metering,no subject to adjust in terms of long working;
•  Three-phase power supply can assure accurate metering in case of cut off in one line(each line of the three-phase & three line)or two lines(any two line of the three-phase & four line);
•  Indicative function for phase loss or voltage indication;
•  The signal will display after it test;
•  Each user(meter)responds to a card,well protect form forgery;
•  Once the remaining electric power quality is approaching the alarming power quality, the digital tube should be lighted to remind user of timely purchasing;
•  Once the electric consumption available is out, it should be auto cut-off;
•  Auto cut-off overload;
•  Date-copying function make the electricity department easier to manage;
•  Load switch;
•  The IC card pov/er selling control system has the function as power selling and using control;
•  Expansible Rs485.

Specifications :

Decriptions :

Model YEM021GC three phase four wire electronic DIN rail active energy meter is a kind of new style three phase four wire active energy meter, it adopt micro-electronics technique, and imported large scale integrate circuit, use advanced technique of digital and SMT techniques, etc. The meter completely accord with relevant technical requirements of class 1 three phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz or 60Hz active energy consumption from three phase four wire AC electricity net. This meter has seven digits LCD displays shows the active energy consumption.

• And there are far infrared and RS485 communication module in it.
• Contact with all kind of AMR system conveniently It has following features: good reliability, small volume, light weight, specious nice appearance, convenient installation, etc.

Transport and storage :

1.  Transport and storage of the meter must not be shaken and must accord with ZBY002-81
2.  The meter must be stored in the original packing box and the environmental temperature is in -20℃～＋55℃ .Relative humidity shall not exceed 95%. And there isn’t any corrosive gas. The environmental temperature shall not vary violently.
3.  The meters should be in the original packing box and the boxes should be piled up no more than five on the rack . The separate meter is not suitable for storage.

3.2 Starting

When current transformer access: The starting current is 0.5%Ib
When direct access: The starting current is 0.004Ib

3.3 Running with no-load

As no current in the circuit and the voltage value is 115% percent of the rated voltage, the testing output no more than one impulse.

3.4 Insulation performance

All circuit interval of the meter can withstand impulse voltage with waveform 1.2/50µs, leak value 6kV, and it would not occur electric arc or rout as it is being tested at the same pole.

3.5 Operating Voltage Range

Normal working voltage: 0.9 ~ 1.1 Rated voltage limit working voltage: 0.8 to 1.2 rated voltage

3.6 Power consumption: Voltage circuit power consumption ≤ 1.5W/5VA, Current loop power ≤ 2VA

3.7 Environmental Conditions

Standard operating temperature: -20 ℃ ~ +75 ℃
Annual average relative humidity: ≤ 80%

3.8 Validity of data retention: ≥ 10 years

Company Profile:

Established in 2002, Zhejiang Yomin Electric Co., LTD (before named Yueqing Yomin Electric Factory, founded in 1996) is a manufacturer and exporter specialized in the research, development and production and service of different kinds of watt-hour meters, digital meters, pointer meter, terminals and accessories etc.

Located in Wenzhou City, Zhejiang Province, we are quite close to Shanghai and Ningbo port. Covering an area of 12000 square meters for manufacturing and administration, we now have over 370 employees making their great efforts for YOMIN. Most of our products are supplied by tender and widely used in domestic and overseas electricity power companies in more than 90 countries and regions.

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee tatal customer satisfaction. Besides, we are awarded with international certificates such as ISO9001, kEMA, CE RoHS, CB,BV etc as well as China domestic certification like CCC and CMC

Deadline of guarantee:

Within 18 months from the date of manufacture the user complies with all of above rules. If the meter still being sealed does not conform to any technical requirements of IEC62053-11, or of any certification of Power Department or Measuring Department

Dimensions: