Payment & Shipping Terms:
|OEM/ODM:||Allowed||Application:||Residential House, Schools, Shopping Malls...|
|Measuring Energy Range:||5(30),10(50),20(100)A||Display Mode:||LCD 6 + 1 / 5 + 2|
|Material Of Meter Case:||PC||Installation:||DIN Rail Installation|
|Standard:||IEC62053 - 21|
DIN Rail Mounted 1 Phase 2 Wire Energy Meter LCD Display Electric YEM011AG - N
|Reference Voltage(V)||Current Specification(A)||
|127 V,230 V||5(30)A ,10(50)A, 20(100)A||
AC voltage 4kv for 1 minute,1.2/50us wavefrom
impulse voltage 6kv
1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board setting
(mounting holes center distance 63 mm), users can choose any one by themselves.
2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.
3. Standard configuration 5+1 digits display (99999.1kWh) by step motor type impulse register. May
select 6+1 digits display (Product Configuration code is AK).
4. Standard configuration one port of pulse output passive(polarity),May select increase a distant
port of pulse output passive (nonpolarity), (Product Configuration code is AI). And contact with all
kind of AMR system conveniently,complying with standard IEC 62053-31 and DIN 43864.
5. Two LED instructions power supply state (green) and signal of energy impulse (red).
6. Standard configuration don’t detection direction of the flow of load current. May select automatic
detection the direction of the flow of load current. And instructions (Only red energy impulse signal
when working, that is meaning the direction of the flow of load current reverse).
7. Single direction measure single phase two wire active energy consumption. It is nothing with
direction of the flow of load current. Complying with standard IEC 62053-21.
8. Directly connect operation, there is two types wiring you may select. Standard configuration typeS
wiring, may select type T wiring (Product Configuration code is TG).
9. Standard configuration short terminals cover, may select extension terminals cover, in order to
protect to use safety. (Product Configuration code is AH).
Contact Person: paola