Three Tariff Single Phase Two Wire Multifunction Energy Meter of Din Rail Mounting

Three Tariff  Single Phase Two Wire Multifunction Energy Meter of Din Rail Mounting

Product Description

Specification

* If you need different reference voltage or current specification, please advisory our sales personnel.

Competitive Advantage

1. 35mm standard DIN rail installation, complying with standard DIN EN50022. Or front board installed (mounting holes center distance 63 mm), users can choose any one by themselves.

2. Six pole width (Modulus 12.5mm), complying with standard JB/T7121-1993.

3. Have three tariffs, may select 12 daily period of times. You can set the date arbitrary which can automatic read the meter every month. May select single tariff function in weekend. (Please specified when ordering)

4. There are a clock and Maintenance-free backup lithium batteries in it. Battery capacity detection and display all the time. It can keep the electricity data for 12 months. The data can be kept forever after blackout.

5. May select cycle display (default) or push the button itemized display, it can display 14 data at most. Can select the data which displayed. The decimal median which displayed can choose set one or two.

6. A port of pulse output passive (polarity), complying with standard IEC 62053-31.

7. There are far infrared and a port of RS485 communication data. It is use for setting and reading the meter. Set and operation have password protection, communication agreement complying with standard DL/T645-1997.

8. Seven LED instructions respectively power supply state, signal of energy impulse, the direction of the flow of load current, the state rates just now and the data communications state.

9. Single direction measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.

10. Standard configuration type S wiring (Inlet from bottom, outlet from top) for direct connect operation, we can also choose another type of wiring, and use CT (Product Configuration code is AN) and PT & CT (Product Configuration code is AP) for operation.

11. Used for measuring active energy and there’s no need to recalibrate after long-term operation.

12. All the components adopted in the meter are of high quality, which guarantee the meter a long service life and high reliability.

Dimension

Wiring Diagram

Why Choose Us? 

We are the manufacturer specializing in producing all kinds of energy meters.With modern production plants and office buildings, our company has introduced the first-class American and European production equipment and top Hi-Tech; set up a scientific, systematized and standardized quality management system;  safety appliance; and obtained the production permit of nationwide industrial production.We have won the international certificate, such as CE, RoHS, ISO9001.